Give your Blitz more tunability and better balance with a Carbon Fiber OutFrontFrames ESC Shelf.
By moving the speed control to the center of the chassis, the truck will have better balance from left to right. The ESC Shelf is also tunable to the track conditions. Are you racing on a high bite indoor surface? Install the forward screws and stiffen the rear of the truck, eliminating excess chassis flex. Leave the forward screws out for a stock feel with more rear chassis flex for those tracks where traction may be hard to find.
Moving the speed control to the center also allows the use of shorter sensor cables. I have found that to properly route the sensor cable from the stock location meant buying a long sensor cable. From the center mounted ESC shelf all of the wires can get shorter, and allowing the use of the more readily available sensor cable lengths. The center mounting also promotes safer routing of cables and wires.
The esc shelf is only 2mm thick enabling you to re-use the stock hardware.
This product was added to our catalog on Tuesday 02 February, 2010.
